SunFounder 3in1 Kit
Name ITEMS IN THIS KIT LINK
3 in 1 Starter Kit 380+
You can also buy them separately from the links below.
COMPONENT INTRODUCTION PURCHASE LINK
Arduino Uno R4 Minima -
Breadboard
ESP8266 Module
Jumper Wires
Resistor
LED
1. Build the Cirduit
Note: The ESP8266 module requires a high current to provide a stable operating environment, so make sure the 9V
battery is plugged in.
2. Edit Dashboard
1. Go to the Quickstart Device you created earlier, click on the menu icon in the upper right corner and select edit
dashboard.
6.2. 2. Get Data from Blynk 281
To Next Page
Loading...
