SunFounder 3in1 Kit - Page 9

SunFounder 3in1 Kit
your projects by utilizing a single power source.
• SWD connector: Debugging is a critical aspect of any project. Simply connect an external debugger to the UNO
R4 Minima and effortlessly monitor the inner workings of your system. Stay in control and gain valuable insights.
• HID support: The UNO R4 Minima comes with built-in HID (Human Interface Device) support, enabling it to
simulate a mouse or keyboard when connected to a computer via a USB cable. This convenient feature makes it
a breeze to send keystrokes and mouse movements to a computer, enhancing usability and functionality.
Tech specs
• Board:
– Name: Arduino® UNO R4 Minima
– SKU: ABX00080
• Microcontroller: Renesas RA4M1 (Arm® Cortex®-M4)
• USB: USB-C® Programming Port
• Pins:
– Digital I/O Pins: 14
– Analog input pin: 6
– DAC: 1
– PWM pins: 6
• Communication
– UART: Yes, 1x
– I2C: Yes, 1x
– SPI: Yes, 1x
– CAN: Yes 1 CAN Bus
• Power
– Circuit operating voltage: 5 V
– Input voltage (VIN): 6-24 V
– DC Current per I/O Pin: 8 mA
• Clock speed Main core 48 MHz
• Memory RA4M1 256 kB Flash, 32 kB RAM
• Dimensions
– Width: 68.85 mm
– Length: 53.34 mm
Pinout
1.1. Arduino Uno R4 Minima 5