16
4
Identify and Store the MV Station
4.1 Identifying the MV Station
Identify the MV Station from its nameplate. The nameplate contains the following
information: MV Station model, major technical parameters, marks of certification institutes,
origins, and serial number.
Very important technical parameters and MV Station-related parameters are
displayed on the nameplate.
Protect the nameplate at all times!
4.2 Checking for Transport Damages
The MV Station has been strictly inspected and tested before delivery. Despite robust
packaging, the container or inside devices may be damaged during transport. Therefore,
once you receive the MV Station, a detailed inspection is necessary.
If any damage is detected, contact the forwarding company or Sungrow immediately.
Examine the contents of the shipment to check the scope of delivery for completeness.
• Check to make sure the MV Station and inner devices are of the same models as those
in your order;
• Check thoroughly the MV Station and inner devices for any possible damages during
transport.
Install and commission the MV Station only when it is technically faultless! Make
sure before installing the MV Station that:
• the MV Station is intact without any damage; and
• all devices inside the MV Station are intact without any damages.
4.3 Storage
If the MV Station is not to be installed immediately after delivery, store it appropriately:
• Store the MV Station indoors, for example, large warehouse or workshop, to prevent
possible condensation or damp.
To Next Page
Loading...
