Sungrow MVS3200-US - Draining Oil from Transformer

42
After removal, re-install the protective cover.
7.1.6 Draining Oil from Transformer
If the transformer is transported with a full oil tank, drain some oil from the transformer after
the product is transported to the site.
No. Device Source
1 Clean hoses and oil tank
Not included in the scope of supply
2 Cleaning cloth
3 Wrench
4 Adjustable wrench
5 Hose connector
6 Pipe clamp
step 1 Ensure that the drain valve is closed.
step 2 Remove the cover plate of the drain valve.
step 3 Remove the cover plate of the drain valve.
step 4 Open the drain valve and the oil in the transformer slowly flows from the transformer into the
tank.
7 Power On the MV Station System Manual