21
Install the inverter at an appropriate height for ease of viewing LED indicator and operating
switch(es).
4.3 Installation Tools
Installation tools include but are not limited to the following recommended ones. If necessary,
use other auxiliary tools on site.
table 4-1 Tool specification
Goggles Earplugs Dust mask Protective gloves
Insulated shoes Utility knife Marker Wrist strap
Wire cutter Wire stripper Hydraulic plier Rubber mallet
Hammer drill (φ10) Phillips screwdriver
(M3, M4, M6)
Electric screwdriver
(M3, M4, M6)
Wrench (30 mm, 35
mm, 46 mm)
RJ45 crimping tool Vacuum cleaner Measuring tape Heat shrink tubing
User Manual 4 Mechanical Mounting
To Next Page
Loading...
