1 Safe
ty Instructions
1 Notice for AC input, charging output and connecting wires .
1) The specification in line with safety standards of the three-hole
socket should be selected as a Charger AC input socket. Choose the larger
size fire retardant wire inline which fits safety standards and rules based on
the overall line length.
2) The connecting wire from battery to charging socket should meet
the safety requirements of the charger output current. The nominal
diameter of the copper wire should be ≥ ( input current/5) mm ², otherwise
they will affect the charging performance because of the line drop, or even
fires can originate due to overheat.
3) AC plug and socket, DC charging plug and socket should be
checked at a regular basis for any damage or defects. If damaged parts are
discovered, they should be replaced in time. Using damaged/defects plugs
or sockets will lead to abnormal working of the charger, even cause fire.
4) AC wire and DC charging cable should be always checked whether
they are aging or damaged. They should be replaced if found, otherwise it
can easily leads to electric shock, fire or other accidents.
5) If the power wire,plug or socket, etc have any damaged, to avoid
any incident, they must be changed by manufacturers or approved
maintenance personnel.
2 The charger as well as all cables, plugs and sockets must be far
away from flammable items like clothing, paper, sofa, gasoline and
explosive gas, otherwise it may cause fire due to overheat because plugs,
sockets, or circuit is aging or contact poorly.
3 Without our permission, it is strictly prohibited for users to change
To Next Page
Loading...
