permane
nt damage to the battery pack, and brings serious economic losses.
2)AC power wire, DC charging cable polarity and precautions
AC input wire is at the rear of the charger. L, N, and Earth are marked on
the input line plug. Please distinguish correctly. L, N, Earth on AC plug
should correspond with those of socket outlets. The Earth wire of the AC
input socket should be connected firmly to the ground, otherwise, the shell
leaks electricity or electrostatic and easily causes injury.
The charging output line is in front of the charger. You can distinguish the
positive and negative of the output line by colors. Red or brown line is to
connect battery "+ "and blue or black to battery" - "(except special
requirements of customers). Special connections of charging polarity with
batteries polarity depend on special charging plugs, sockets, and user
special requirements. The polarity of the charging socket should be
consistent with the polarity of charging plug polarity, otherwise, it can not
charge. Please check before using it.
3)Instruction
First, please firmly connect the charger output plug with the battery pack
then connect the AC plug with the AC outlet. After the correct connection,
the current will be output from the charger, At the same time, the charger
To Next Page
Loading...
