14
4-13. Test Operation (Pedal Operation)
[ Caution ]
During operation, do not touch spinning or moving parts or press them with an object.
It may cause physical injuries or machine breakdowns.
[ Fig. 15 ]
1) Move the pedal at the B position to see if you can
conduct low speed sewing.
2) Move the pedal at the C position to see if you can
conduct high-speed sewing.
3) Step the pedal (B or C position). Stay your feet away
from the pedal and place it at the Neutral A position.
Check whether the needle stops below the surface of the
needle plate (in case of setting up the lower stop position).
To Next Page
Loading...
