9
44
Installation
[ Caution ]
Sewing machine installation and wiring work should be conducted by qualified engineers.
Since the sewing machine's body weights 50kg or so, at least two persons are needed to install the sewing machine.
Do not turn on the power until the installation is completed.
If the foot pedal is accidentally stepped, the sewing machine can start operation, providing causes for accidents.
When the sewing machine body is laid down or erected straight, use both hands. If only one hand is used, it may cause
injuries such as fingers stuck in the machine.
4-1. Where to Install
1) Do not install the sewing machine next to television,
radio and wireless phones, since they can cause noises to
the sewing machine.
2)
Connect the power plug of the sewing machine directly to
the AC outlet. If a multi-tap is used, it may cause
malfunction of the sewing machine.
4-2. Machine Transportation
1) The body of the sewing machine shall be transported by
two persons as in the figure.
4-3. Laying Down Sewing Machine
1) Hold the upper part of the sewing machine body with
two hands and lay it down by pushing it backward.
Then the sewing machine lies down. Make sure that press
the lower part of the plate leg of the sewing machine.
Otherwise, the sewing machine body and the entire plate
leg might fall backward, causing accidents.
[ Fig. 3 ]
[ Fig. 1 ]
[ Fig. 2 ]
To Next Page
Loading...
Need help?
General
