7
ⓐ
ⓒ
ⓓ
ⓕ
ⓔ
ⓑ
SPS/D-B1254(B1263) Series is made to sew patterns on fabrics and other similar material for
manufacturing. Follow the following indications when operating the machine.
ⓐ Read through this manual carefully and completely before operating the machine.
ⓑ Wear the proper clothes for work.
ⓒ Keep hands or other parts of the body away from the machine operation parts(needle, shuttle,
thread take-up lever, and pulley etc.) when the machine is being operated.
ⓓ Keep the covers and safety plates on the machine during operation.
ⓔ Be sure to connect the earthing conductor.
ⓕ Close down the electric motive power and check if the switch is turned “off ”before opening
electric boxes such as the control box.
ⓖ Stop the machine before threading the needle or checking after work.
ⓗ Do not step on the pedal when turning the power on.
ⓘ Do not operate the machine with any cooling fan blocked.
The air-filter on control box must be cleaned once a week.
ⓙ If possible, install the machine away from source of strong electrical noise such as high
frequency welding machines
1-4) Machine Operation
Warning
ⓐ Safety label : It describes cautions during operating the machine.
ⓑ Thread take-up cover : It prevents from any contact between body and take-up lever.
ⓒ Motor cover : It prevents from insertion of hands.feet or clothes by motor.
ⓓ Label for specification of power : It describes caution for safety to protect against electric shock
during rotation the motors.
ⓔ Finger guard : It prevent from contacts between a finger and needle.
ⓕ Safety plate : It protect eyes against needle breaks.
1-5)
Devices for safety
Warning
Belt will crush or amputate finger or hand, keep cover in place before
operating, turn off power before inspecting or adjusting.
Warning
To Next Page
Loading...
Need help?
General
