11
44
MACHINE INSTALLATION
1) Machine Installation Conditions
A. Do not use the machine where the voltage is over regular voltage ±10% to prevent accidents
B. For safe operation of the machine, use the machine under the following conditions.
Surrounding Temperatuer During Operation : 5。~40℃ (41。F~104。F)
Surrounding Temperature During Maintenance : -10。~60℃(14。F~140。F)
C. Humidity : Between 20~80%(Relative humidity)
2) Electric Installation Conditions
A. Power Voltage
· The power voltage must be between regular voltage ±10%
· The frequency of the power should be regular frequency(50/60㎐) ±1%
B. Electromagnetic Wave Noise
Use separate power with strong magnetics of high frequency products, and do not leave the machine near them.
C. Ues low voltage when supplements or accessories are being adhered.
D. Be careful not to have water of coffee be spilled into the Controller and Motor.
E. Do not drop the Controller or Motor.
[ Fig. 1 ]
A. Please fix the oil tub support ①, the oil support ②, the
control box ③ and the power switch ④ on the table.
3) How to Install the Table
[ Fig. 2 ]
B. Attach the bed cushion rubber ① and safety switch
supporting rubber ② to the table.
①
①
②
②
③
④
To Next Page
Loading...
Need help?
General
