Website: www.sunsynk.com E-mail: sales@globaltech-china.com 50
is the same or higher than the inverter
specification.
Heat sink high-temperature failure
Heat Sink temp is too high
1. Check if the working environment
temperature is too high.
2. Turn off the inverter for 30 minutes
and restart.
AC_SlaveContactor_Failure
AC_U_GridCurr_DcHigh_Fault
AC_V_GridCurr_DcHigh_Fault
AC_W_GridCurr_DcHigh_Fault
AC_A_InductCurr_DcHigh_Fault
AC_B_InductCurr_DcHigh_Fault
AC_C_InductCurr_DcHigh_Fault
AC_A_InductCurr_High_Fault
AC_B_InductCurr_High_Fault
To Next Page
Loading...
Need help?
General