Page | 65
APPENDIX B
Inverters sold in Australia will be set to the Default Australian standards
APPENDIX C
The Sunsynk Three-Phase Hybrid Inverter inverter is compatible with the SolarMan
app, via a Wifi or GSM data logger (See SolarMan instruction manual).
APPENDIX D
If an external Residual Current Device (RCD) is used it should be of Type A/AC with a
tripping current of 30mA or higher.
Use of RCDs
Residual Current Devices (RCDs): An RCD dedicated for an Inverter Energy System
(IES) may be used to meet the mechanical cable protection requirements of
AS/NZS3000 for the cable from the switchboard to the IES. If an RCD is installed the
engineer must:
1) Disconnect all live conductors (including both active and neutral conductors) and
2) Be of the type specified in the inverter manufacturer’s instructions or as labelled on
the inverter.
To Next Page
Loading...
