SINGLE PHASE HI 3.6/5kW | User Manual46
Therefore, if a communication error occurs:
1. Check that your data cable is the correct type.
2. Check that the data cable is plugged into the correct sockets. Usually, RS485 is employed, but some
battery manufacturers use others.
PLEASE NOTE
With some types of lithium batteries, the BMS cannot be controlled by the Sunsynk inverter. In this
case, treat the battery as a lead-acid type and set the charging and discharging protocol following the
battery manufacturer's specications.
It is crucial to refer to the manuals that manufacturers produce for their batteries. That way, the chance of
errors occurring during installation is signicantly reduced. Below is a list of batteries that have been exam-
ined, tested, and approved by Sunsynk.
Brand Model
48V
Storage
Inverter
RS485
or CAN
Inverter
Setup
Notes
DYNESS
B4850
CAN
0
POWERBOXF 0
PYLON
US2000B
CAN 0
RS485 12
US3000
CAN 0
RS485 12
US2000C
CAN 0
RS485 12
US3000C
CAN 0
RS485 12
UP5000
CAN 0
RS485 12
US5000
CAN 0
RS485 12
Force L1
CAN 0
RS485 12
Force L2
CAN 0
RS485 12
To Next Page
Loading...
Need help?
General