SINGLE PHASE HI 3.6/5kW | User Manual58
What this page displays:
P(Q): It adjusts the inverter reactive power according to the set active power.
P(PF): It adjusts the inverter PF according to the set active power.
Lock-in/Pn 50%: When the inverter output active power is less than 50% rated power, it won't enter the
P(PF) mode.
Lock-out/Pn 50%: When the inverter output active power is higher then 50% rated power, it will enter the
P(PF) mode.
For the detailed setup values, please follow the local grid code.
PLEASE NOTE
Only when the grid voltage is equal to or higher than 1.05 times the rated grid voltage will the P(PF)
mode take eect.
To Next Page
Loading...
Need help?
General