SRC-7000 User’s Manual
44
Chapter 6 Communications
The communications menu enables you to upload configurations
to the SRC-7000 that you have made or modified. You can also
download the SRC-7000 active configuration to your PC.
Downloading from the remote control
To download a configuration from the SRC-7000:
1. Connect the SRC-7000 to the PC. See SRC-7000
RemoteComm installation on page 6.
2. Start the RemoteComm software as described in
Starting the software on page 7.
3. Click Communications and select Download From
Remote from the drop down menu.
The software prompts you to save the current configuration.
A status bar shows the progress of the download.
To Next Page
Loading...
