43
Appendix B - Accessories
＊SLC–2080
The SLC–2080 is an optional link cable that enables
SRC-3820 to transmit data to another one or to
upgrade program from computer.
With the Upgrade Tools, it enables uses to upgrade
program and preprogrammed codes database.
● Upgrade Memory: It will erase old preset data, and
memory will be replaced by new factory default.
● Upgrade Pre-programmed code: Preset codes
database only.
● Upgrade MCU: MCU program only.
If you have any question, please refer to the SLC-2080
user manual for more information.
Using the Transmit wire, you are able to connect both
SRC-3820 for data transmission. Please refer to page 36
for more information.
USB cable Transmit wire
To Next Page
Loading...
