Super X10SBA - Iscsi Configuration; Add an Attempt; Delete Attempts; Change Attempt Order

4-20
X10SBA/X10SBA-L User’s Manual

iSCSi Conguration
iSCSI Initiator Name
This feature allows the user to enter the unique name of the iSCSI Initiator in IQN
format. Once the name of the iSCSI Initiator is entered into the system, congure
the proper settings for the following items.

Add an Attempt

Delete Attempts

Change Attempt order

Intel®I210 Gigabit Network Connection--00:25:90:90..
PORT CONFIGURATION MENU

NIC Conguration
Link Speed
This feature allows the user to set the Network Interface Connection speed for a
LAN port specied by the user. The options are Auto Negotiated, 10 Mbps Half,
10 Mbps Full, 100 Mbps Half, and 10 Mbps Full.
Wake On LAN
Select Enabled for Wake_On_LAN support, which will allow the system to "wake
up" when an onboard LAN device receives an incoming signal. The options are
Enabled and Disabled.
Blink LEDs
This feature indicates the LAN ports that are connected to the network using blink-
ing LED indicators.
PORT CONFIGURATION INFORMATION
The following port conguration information will be displayed:
UEFI Driver:
Adapter PBA:
Chip Type:
PCI Device ID:
Bus: Device: Function: