19-38 C D/B O’ M
G C A
24 Grit Abrasive planing, surfacing rough-sawn boards, maximum stock removal, glue removal.
36 Grit Abrasive planing, surfacing rough-sawn boards, maximum stock removal, glue removal.
50 Grit Surfacing and dimensioning boards, trueing warped boards.
60 Grit Surfacing and dimensioning boards, trueing warped boards.
80 Grit Light dimensioning, removal of planer ripples.
100 Grit Light surfacing, removal of planer ripples.
120 Grit Light surfacing, minimal stock removal.
150 Grit Finish sanding, minimal stock removal.
180 Grit Finish sanding only, not for stock removal.
220 Grit Finish sanding only, not for stock removal.
A S G
Fig. 15 Accessing inboard abrasive fastener
To Next Page
Loading...
