SuperMax SANDER - INTELLISAND Technology

INTELLISAND
TM
Technology: Auto-
matically adjusts conveyor speed
based on load
- Prevents gouging, damaging or burning
stock
- Provides consistent nish even with
varying grain pattern and density
- Greatly increases abrasive planing and
dimensioning speed.
Indexed alignment setting for narrow
and wide stock. When sanding stock
wider than 19”, the index lever will
properly adjust the conveyor for
flawless wide sanding.
Flatness Guarantee: Precision-flat-
tened steel conveyor bed reinforced
with four steel cross sections for
no “flex” in conveyor, guaranteeing
flatness to less than .010 across
the width of the sander.
Patented abrasive attachment
system effectively tensions the
abrasive wraps, preventing
loosening and overlapping.
Easiest access to abrasive fastening
system of any drum sander. Extra
wide space to access fasteners to
eliminate need for special tools.
Self-cooling sanding drum
prevents overheating and
extends abrasive life.
11
Convenient access to coupler
and fasteners to allow for quick
and easy changes of various
brushes or sanding drum.
Simple alignment feature
makes adjustment quick
and easy.
Fast Lever makes
it easy to change
alignment settings
for narrow and wide
stock.
Electronic Variable Speed
control box for adjusting
brush RPM for endless
nish possibilities.
Easy height adjustments
with a thrust bearing
below the handle. No
backlash or slop in the
height adjustment
mechanism allowing
easier and smoother
height adjustments.
OPTIONAL ACCESSORIES
Sanding drum
#71938-1
Nylon brush head
#71938-3
Wire brush head
#71938-2
Replacement Flatter
Strips (12 ct.) - specify
grit 60-320 available
#62-2XXX
Folding infeed/outfeed tablesOpen stand with shelf
Closed
stand
with built-in casters
#59120
#71938-CL
Abrasive
cleaning
stick
Digital
depth gauge
(.000 increments)
#71938-DRO
Casters,
set of 4
#98-0130
#71938-OP
19-38
COMBINATION SANDER
#71938
For use with
open stand
For use with
closed stand
#71938-7F
#71938-7F-CL
NEW