17
Chapter 1: Introduction
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
UID SW Unit ID Switch (Push-Button Toggle Switch ON/OFF)
LED Description Status
LED7 Power LED Solid Green: Power On
LED1 BMC Heartbeat LED
Green: Blinking (BMC Normal)
Green: Fast Blinking (BMC Initializing)
LED8 UID LED Blue: UID Activated
Connector Description
JL1 Chassis Intrusion Header
JSATA1 3-Pin Connector for HDD Use
JNCSI1 NCSI Connector
JPWR2 12V 8-Pin CPU Core Power Supply Connector
JPWR3 24-Pin ATX Power Supply Connector
JF1 Front Control Panel Header
BT1 Onboard Battery
M.2-C1/M.2-C2 M.2 PCIe Interfaces
NVMe0~11 NVMe Ports
NVMe12~15, SATA0~15 NVMe/SATA Hybrid Ports
JIPMB1 4-Pin BMC External I
2
C Header (For an IPMI-Supported Card)
DIMMA1~DIMML1 DIMM Slots
FAN1~FAN6 System Cooling Fans
AIOM1~AIOM2 Supermicro® Advanced I/O Module (AIOM) Slots
JFP1 Front Control Panel Header 1
LWIO/ RWIO Riser Slots
IPMI LAN RJ45 Dedicated IPMI LAN Port
JTPM1 TPM (Trusted Platform Module)/Port 80
PWRI2C Power Supply SMBus I2C Header
COM1 Rear Panel COM Port #1
VGA Rear Panel VGA Port
JSEN1 Inlet Sensor Header
USB0/1 USB 2.0 Ports
USB4/5 USB 3.0 Ports
Note: Jumpers, connectors, switches, and LED indicators that are not described in the
preceding tables are for manufacturing testing purposes only, and are not covered in this
manual.
To Next Page
Loading...
