Supermicro A+ Server AS -1115CS-TNR - Pcie Expansion Cards

48
Chapter 3: Maintenance and Component Installation
3.10 PCIe Expansion Cards
The system accepts two full-height, half-length expansion cards, mounted on riser cards and
brackets.
Installing an Expansion Card
1. Power down the system as described in Section 3.1 and remove the cover.
2. Pull the riser bracket up and out using the pull-tabs.
Figure 3-15. Riser Card Bracket and Expansion Slots
Riser Bracket
1
2
Figure 3-14. Expansion Card Slots in the Chassis
Expansion Card Congurations
Slot
Mechanical Electrical
1 Full-height, half-length PCIe 5.0 x16
2 Full-height, half-length PCIe 5.0 x16