Supermicro AS -2024S-TR - Page 90

90
A+ Server AS -2024S-TR User's Manual
MBA Conguration Menu
Legacy Boot Protocol
Selects the non-UEFI boot protocol. Options are PXE, iSCSI, and None.
Boot Strap Type
Selects the boot strap type. Options are Auto Detect, BBS, Int 18h, and Int 19h.
Hide Setup Prompt
Selects whether the setup prompt is displayed during ROM initialization. Options are
Disabled and Enabled.
Setup Key Stroke
Ctrl-S and Ctrl-B.
Banner Message Timeout
Selects the timeout value Options are seconds chosen.
Link Speed
Selects the link speed. Options are AutoNeg, 10Mbps Half, 10Mbps Full , 100Mbps Half,
and 100Mbps Full.
Pre-boot Wake On LAN
Disabled and Enabled.\
VLAN Mode
Disabled and Enabled.
VLAN ID
Displays the VLAN ID.
iSCSI Boot Conguration Menu
iSCSI General Parameters
TCP/IP Parameters via DHCP
Enabled.
iSCSI Parameters via DHCP
Enables or Disables CHAP authentication. Options are Disabled and Enabled.
Boot to iSCSI Target
Enables or Disables booting to iSCSI target after login. Options are Enabled, Disabled,
and One Time Disabled.