Supermicro AS -2024S-TR - Page 91

Chapter 6: UEFI BIOS
91
DHCP Vendor ID

Link Up Delay Time

Use TCP Timestamp
Enables or Disables TCP timestamp. Options are Disabled and Enabled.
Target as First HDD
 Disabled
and Enabled.
LUN Bust Retry Type

IP Version

iSCSI Initiator Parameters

secondary DNS, iSCSI name, CHAP ID, and CHAP secret.
iSCSI First/Second Target Parameters
Connect
Enables or Disables target establishment. Options are Disabled and Enabled.
This submenu also displays the IP address, TCP port, boot LUN, iSCSI name, CHAP ID,
and CHAP secret.
Secondary Device
Secondary Device
Input the secondary device MAC address here.
Use Independent Target Portal
Use the independent target portal when multipath I/O is enabled. Options are Disabled
and Enabled.
Use Independent Target Name
Use the independent target name when multipath I/O is enabled. Options are Disabled
and Enabled.

ID, Bus:Device:Function, link status, permanent MAC address and virtual MAC address.