Supermicro AS-4124GS-TNR - 1.4 Server Chassis Features

10
A+ Server AS -4124GS-TNR User's Manual
Control Panel Features
Item Feature Description
1 Power Button
The main power switch applies or removes primary power from the
power supply to the server but maintains standby power. To perform
most maintenance tasks, unplug the system to remove all power.
2 Reset Button The reset button is used to reboot the system.
3 Power LED
Indicates power is being supplied to the system power supply units.
This LED is illuminated when the system is operating normally.
4 HDD LED
Indicates IDE channel activity. SAS2/SATA drive and/or DVD-ROM

5 NIC1 LED 
6 NIC2 LED 
7
Universal Information
LED
See the following table for the status shown by this LED.
8 Power Fail LED Indicates a power supply module has failed.
Figure 1-1. Control Panel View
1.4 Server Chassis Features
Control Panel
󰀨
button. In addition there are six LEDs. The locations of these buttons and LEDs on the control
panel are described below. See Chapter 4 for details on the control panel connections.
1
7
6
5
4
3
2
8