11
Chapter 1: Introduction
Universal Information LED
Status Description
Continuously on and red An overheat condition has occurred (this may be caused by cable
congestion).
Blinking red (1 Hz) Fan failure: check for an inoperative fan.
Blinking red (0.25 Hz) Power failure: check for an inoperative power supply.
Solid blue Local UID has been activated. Use this function to locate the server in a rack
environment.
Blinking blue (300 msec) Remote UID has been activated. Use this function to activate the server from
a remote location.
Front Chassis Features
Item Feature Description
1 Hot-swap drive bays Drive bays for hot-swap 2.5" SATA/SAS drives
2 Hybrid hot-swap drive bays These two HDD slots are hybrid and can support SATA/SAS/NVMe drives
3 Control Panel
Control panel for the server. See the Control Panel section above for
details.
Figure 1-2. Chassis Front View
Front Features
The SC418GTS-R4016BP is a 4U chassis See the illustration below for the features included
on the front of the chassis.
3
11 11 11 11 11 11 11 11 11 11 22 22
To Next Page
Loading...
