38
Chapter 3: Maintenance and Component Installation
Figure 3-3. Daughter Board in System
PCI Expansion Card Installation
The system includes a daughterboard for GPU/PCIe expansion capabilities. See Figure 3-2
for an example of the daughterboard in the system. See Figures 3-3 and 3-4 for topology for
the daughterboards in AS -4124GS-TNR systems.
Installing Expansion Cards
1. Power down the system and open the chassis cover.
2. Remove the screw holding the chassis slot shield in place.
3. Insert the expansion card into the serverboard slot, while aligning the expansion card
shield with the slot in the rear of the chassis.
4. Secure expansion card shield to the chassis using the screw previously removed.
Note:
To Next Page
Loading...
