Supermicro AS-4124GS-TNR - Installing the Inner Rails on the Chassis

Chapter 2: Server Installation
21
Warning: do not pick up the server with the front handles. They are designed to pull
the system from a rack only.
Note:

Figure 2-2. Installing the Inner Rails
Installing the Inner Rails on the Chassis
Installing the Inner Rails
1. Identify the left and right side inner rails. Place the correct inner rail on the side of the
chassis, aligning the hooks of the chassis with the inner rail holes. Make sure the rail

2. Slide the rail toward the front of the chassis to hook the inner rail onto the side of the
chassis.
3. 
4. Repeat for the other inner rail.
1
3
2