15
Chapter 1: Introduction
Connector Description
JCPLD1 Complex-Programmable Logical Device (CPLD) Header
JF1 Front Control Panel Header 1
I-SATA0~I-SATA3 SATA 3.0 Ports
JNCSI1 NCSI
JL1 Chassis Intrusion Header
JPW1~JPW4 Serverboard Main Power Supply Connector
GPU PWR1~10 12V 8-pin Power Connector for Riser Card GPU
BP PWR1~3 12V and 5V 8-pin Power Connector for Backplane
JTPM1 Trusted Platform Module/Port 80 Connector
*Note: Jumper is for manufacturing testing purposes only and is not covered further in this
manual.
To Next Page
Loading...
