33
A+ Server AS -4124GS-TNR User's Manual
11. After the Force Frame is secured and the CPU package is in place, now you must
install the heatsink to the frame. Lower the heatsink down till it rests securely over the
four screw holes on CPU Package on the socket frame.
12. Using a diagonal pattern, tighten the four screws down on the heatsink in a clockwise
the processor and heatsink onto the motherboard. Repeat this procedure for any
remaining CPU sockets on the Motherboard.
#1 Screw
#2 Screw
#3 Screw
#4 Screw
To Next Page
Loading...
