Supermicro AS-4124GS-TNR - Page 87

Chapter 6: UEFI BIOS
87
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system event log
is full. Select Erase Immediately to erase all events in the log when the system event log is
full. The options include Do Nothing and Erase Immediately.

BMC Network Conguration
Update IPMI LAN Conguration
Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The options include No and Yes.
*If the item above set to Yes, the following item will become available for user's
conguration:
Conguration Address Source
This feature allows the user to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the system


IP address for this computer. The options include Static and DHCP.
VLAN
 Disabled and Enabled.
IPv6 Support
Use this feature to enable IPv6 support. The options include Enabled and Disabled.