SC815 Chassis Manual
4-6
All Other Power Supplies
Solid Green: When illuminated, this green LED indicates that the power supply is on.
Solid Amber: When illuminated, the amber LED indicates the power supply is
plugged in and turned off, or the system is off but in an abnormal state.
4-6 Overheating
The section lists actions that should be taken in the unlikely event the server
overheats.
Overheat Temperature Setting
Some backplanes allow the overheat temperature to be set at 45, 50, or 55 by
changing a jumper setting. For more information, download the backplane user
manual at www.supermicro.com. To access the manuals on the Website, click sup-
port, and then click the manuals link.
Overheating Condition
If the Server Overheats, do the Following:
1. Use the LEDs to determine the nature of the overheating condition.
2. Conrm that the chassis covers are installed properly.
3. Check the routing of the cables and make sure all fans are present and oper-
ating normally.
4. Verify that the heatsinks are installed properly.
All Other Power Supply LEDs
State Indication
Solid Green System is on.
Solid Amber System is off and plugged in.
To Next Page
Loading...
