E-14
SC826 Chassis Manual
Description: This cable has an iPass (SFF-8087/Mini-SAS) connector (36-pin) at
each end. It connects from the HBA to the BPN-SAS2-826EL backplane.
Cable Name: SFF-8087 (Mini-SAS) TO SFF-8087 (Mini-SAS)
Part #: CBL-0108L-02 Length: 39 cm (15 inches)
Part #: CBL-0109L-02 Length: 22 cm (9 inches)
Part #: CBL-0110L-02 Length: 18 cm (7 inches)
Description: This cable has one SFF-8484 (32-pin) connector on one end and one
iPass (SFF-8087/Mini-SAS) connector (36-pin) at the other. This cable connects
from the HBA to the SAS2-826EL backplane.
Cable Name: iPass to 4-Lane
Part #: CBL-0117 Length: 46 cm (18 inches)
Supported Internal HBA to Backplane Cables
Use the following listed cables to create connections between the internal HBA and
backplane. The cables required depend on the HBA connector.
To Next Page
Loading...
