Supermicro SC826BE1C-R920LPB - Appendix A SC826 Chassis Cables; A-1 Overview; A-2 Cables Included with SC826 Chassis (SAS;SATA)

A-1
Appendix A: Chassis Cables
Appendix A
SC826 Chassis Cables
A-1 Overview
This appendix lists supported cables for your chassis system. It only includes the
most commonly used components and congurations. For more compatible cables,
refer to the manufacturer of the motherboard you are using and our Web site at:
www.supermicro.com.
A-2 Cables Included with SC826 Chassis (SAS/SATA)
Part # Type Length Description
CBL-0087 Cable 50.8 cm (20")
Round 16-pin to 16-pin ribbon front
panel cable
CBL--0160L Cord US power cord 16 AWG, PB free
CBL-0217L Cable
16-pin control panel converter cable
for SC826 PBF
CBL-0157L Cable 22.86 cm (9")
8 pin to 8 pin ribbon cable for
SGPIO, PB free
CBL-0191L Cable 50 cm (19.685")
20-pin to 20-pin cable for control
panel
CBL-0139L Wire 50 cm (19.685") IDE 80-Wire cable for DVD ROM
- Cable 182.88 cm (6') Two regional power cords
CBL-0180L SATA varies
Set for four SATA cables. Length
varied to minimize airow interfer-
ence.
CBL-0078 Cable 45 cm (17.7165") Round oppy cable