Supermicro SC826BE1C-R920LPB - Appendix E BPN-SAS2-826 EL Backplane Specifications; E-1 ESD Safety Guidelines; E-2 General Safety Guidelines; E-3 An Important Note to Users

E-1
Apendix E: BPN-SAS2-826EL Backplane Specications
Appendix E
BPN-SAS2-826EL Backplane Specications
To avoid personal injury and property damage, carefully follow all the safety steps
listed below when accessing your system or handling the components.
E-1 ESD Safety Guidelines
Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent dam-
age to your system, it is important to handle it very carefully. The following measures
are generally sufcient to protect your equipment from ESD.
• Use a grounded wrist strap designed to prevent static discharge.
• Touch a grounded metal object before removing a component from the antistatic
bag.
• Handle the backplane by its edges only; do not touch its components, peripheral
chips, memory modules or gold contacts.
• When handling chips or modules, avoid touching their pins.
• Put the card and peripherals back into their antistatic bags when not in use.
E-2 General Safety Guidelines
• Always disconnect power cables before installing or removing any components
from the computer, including the backplane.
• Make sure that the backplane is properly and securely on the motherboard to
prevent damage to the system due to power outages.
E-3 An Important Note to Users
All images and layouts shown in this user's guide are based upon the latest
backplane revision available at the time of publishing. The card you have received
may or may not look exactly the same as the graphics shown in this manual.