Supermicro SuperServer 1029GQ-TRT - Enabling NVMe RAID via BIOS

140
SuperServer 1029GQ-T(N/X/V)RT User's Manual
F.2 Enabling NVMe RAID
RAID for NVMe SSDs must be enabled through the UEFI BIOS.
1. Install the patch as described in the Restrictions and Requirements section on a
previous page.
2. Reboot the server.
3. 
4. Switch to Advanced>ChipsetConguration>NorthBridge>IIOConguration>
Intel VMD Technology > Intel VMD for Volume Management on CPU2.
5. Enable the VMD.
Figure F-2. BIOS VMD Settings
6. 
7. 
8. Switch to Advanced > Intel® Virtual RAID on CPU > All Intel VMD Controllers >
Create RAID Volume.
9. Set Name.
10. Set RAID Level.