Supermicro SuperServer 1029GQ-TRT - Page 83

Chapter 6: BIOS
83
South Bridge
Legacy USB Support
This feature enables support for USB 2.0 and older. The options are Enabled and
Disabled. Default setting is Enabled.
XHCIHand-o󰀨
When disabled, the motherboard will not support USB 3.0. Options are Enabled and
Disabled. Default setting is Disabled.
Port 60/64 Emulation
This feature allows legacy I/O support for USB devices like mice and keyboards. The
options are Enabled and disabled. Default setting is Enabled.
Port 61h bit-4 Emulation
Select Enabled to enable the emulation of Port 61h but-4 toggling in SMM (System
Management Mode). The options are Disabled and Enabled.
Install Windows 7 USB Support
Enable this feature to use the USB keyboard and mouse during the Windows 7 installation,
since the native XHCI driver support is unavailable. Use a SATA optical drive as a USB
drive, and USB CD/DVD drives are not supported. Disable this feature after the XHCI
driver has been installed in Windows. The options are Disabled and Enabled.
ServerME(ManagementEngine)Conguration

• Operational Firmware Version
• Backup Firmware Version
• Recovery Firmware Version
• 
• 
• Current State
• Error Code
SATAConguration
When this submenu is selected, the AMI BIOS automatically detects the presence of the
SATA devices that are supported by the Intel PCH chip and displays the following items: