Supermicro SUPERSERVER 5018D-MHR7N4P - Boot Settings

7-36
SUPERSERVER 5018D-MHR7N4P User's Manual
Boot Mode Select
Use this item to select the type of device that the system is going to boot from. The
options are Legacy, UEFI, and Dual. The default setting is Dual.
Fixed Boot Order Priorities
This option prioritizes the order of bootable devices that the system to boot from.
Press <Enter> on each entry from top to bottom to select devices.
• Dual Boot Order #1
• Dual Boot Order #2
• Dual Boot Order #3
• Dual Boot Order #4
• Dual Boot Order #5
• Dual Boot Order #6
• Dual Boot Order #7
• Dual Boot Order #8
7-7 Boot Settings
