7-30
SUPERSERVER 5018D-MHR7N4P User's Manual
7-5 IPMI
settings.
BMC Firmware Revision
IPMI STATUS (Baseboard Management Controller)
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at bootup. The options are Enabled
and Disabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot.
Select Yes, On every reset to erase all system event logs upon each system reboot.
Select No to keep all system event logs after each system reboot. The options are
No, Yes, On next reset, and Yes, On every reset.
To Next Page
Loading...
Need help?
General
