Chapter 5: Advanced Motherboard Setup
5-5
Recommended Population (Balanced)
DIMMA1 Slot DIMMB1 Slot DIMMA2 Slot DIMMB2 Slot Total System Memory
4GB 4GB 8GB
4GB 4GB 4GB 4GB 16GB
8GB 8GB 16GB
8GB 8GB 8GB 8GB 32GB
16GB 16GB 32GB
16GB 16GB 16GB 16GB 64GB
32GB 32GB 64GB
32GB 32GB 32GB 32GB 128GB
5-5 Adding PCI Expansion Cards
PCI Expansion Slots
One RSC-RR1U-E8 riser card is used to support an expansion (add-on) card to
the system.
PCI Card Installation
Before installing a PCI add-on card, make sure it is supported by the riser card.
Begin by releasing the locking tab that corresponds to the slot you wish to populate.
Insert the expansion card into the riser card by pushing down with your thumbs
evenly on both sides of the card.
PCI Slot/Card Congurations
Riser Card Expansion Card Supported
RSC-RR1U-E8 (pre-installed) 1x PCI-E 3.0 x8 card
To Next Page
Loading...
Need help?
General
