Chapter 1
Introduction
1-1 Overview
The SuperServer 5018D-MHR7N4P is an embedded system comprised of two main
subsystems: the SC813MFTQC-R407CB 1U chassis and the X10SDV-7TP4F single
processor motherboard. Please refer to our website for information on operating
In addition to the motherboard and chassis, various hardware components have
been included with the 5018D-MHR7N4P, as listed below:
• One 4-cm fan (FAN-0065L4)
• One riser card (RSC-RR1U-E8)
• One special I/O shield (MCP-260-00100-0B)
Note: For your system to work properly, please follow the links below to download
all necessary drivers/utilities and the user’s manual for your server.
• Supermicro product manuals: http://www.supermicro.com/support/manuals/
• Product drivers and utilities: ftp://ftp.supermicro.com
• Product safety info: http://www.supermicro.com/about/policies/safety_informa-
tion.cfm
If you have any questions, please contact our support team at:
support@supermicro.com
Chapter 1: Introduction
1-1
To Next Page
Loading...
Need help?
General
