Supermicro SUPERSERVER 5018D-MHR7N4P - Page 87

Chapter 7: BIOS
7-11
Energy Efcient Turbo
En-
able and Disable.
DRAM RAPL Conguration
Override BW_LIMIT_TF
This feature allows the user to turn off the "Override BW_LIMIT_TF (Time
Frame)" setting when the item "Running Average Limit for DRAM modules"
(DRAM RAPL) is set to Enabled so that the DRAM RAPL setting can work
properly. The default setting is 1.
DRAM RAPL Extended Range
Use this feature to set the DRAM Running Average Power Limit (RAPL)
Extended Range. The options are Disable and Enable.
Chipset Conguration
Warning: Setting the wrong values in the following features may cause the system
to malfunction.
North Bridge

IIO Conguration
EV DFX (Device Function On-Hide) Features
When this feature is set to Enable, the EV_DFX Lock Bits that are located on a
processor will always remain clear during electric tuning. The options are Dis-
able and Enable.
IIO1 Conguration
M.2 PCI-E 3.0 X4

options are Gen 1 (Generation 1) (2.5 GT/s), Gen 2 (Generation 2) (5 GT/s),
and Gen 3 (Generation 3) (8 GT/s).