Supermicro SuperServer SYS-111C-NR - Chapter 1 Introduction; 1.1 Overview of SuperServer SYS-111 C-NR

10
Chapter 1: Introduction
Chapter 1
Introduction
1.1 Overview
This chapter provides a brief outline of the functions and features of the SuperServer

System Overview
Motherboard
X13SEDW-F
Chassis
CSE-LB16TS-R860AW3
Processor
Single 4th Gen Intel Xeon Scalable (Sapphire Rapids) processor, P+ (LGA4189)
sockets; up to 300W TDP (350W with conditions)
Memory
16 DIMM slots that support up to 4TB of DDR5 RDIMM to 4800MT/s
Drive Support
Ten hot-swap 2.5" SATA (default) drive bays (Ten optional NVMe drive bays by
additional cables or SAS3 via optional AOC)
Two M.2 PCIe 3.0 x2 M-Key in 22110 or 2280 form factors
Expansion Slots
Two PCIe 5.0 x16 (FHHL)
Two PCIe 5.0 x16 AIOM (default)
I/O Ports
One RJ45 dedicated IPMI LAN port
Two USB 3.2 Gen1 ports (rear)
Two USB 2.0 ports (front)
One VGA port
One serial port (rear)
System Cooling
Six 40x40x56mm PWM fans
Power
󰀩
Form Factor
1U rackmount; (WxHxD) 17.2” x 1.7” x 23.5” (437 x 43 x 597mm)
A link to the Quick Reference Guide can be found on the SYS-111C-NR of the Supermicro
website.
           
compliant with UL or CSA: LB16-8, LB16CDC-R8X13, LB16-12, LB16CDC-R12X13.