Supermicro SuperServer SYS-111C-NR - Drive Carrier Indicators

44
Chapter 3: Maintenance and Component Installation
Drive Carrier Indicators
Each drive carrier has two LED indicators: an activity indicator and a status indicator.
Drive Carrier LED Indicators
Color Blinking Pattern Behavior for Device
Activity
LED
Blue Solid On Idle SAS drive installed
Blue Blinking I/O activity
󰀨 Idle SATA or no drive
Status
LED
Red Solid On Failure of drive with RSTe support
Red Blinking at 1 Hz Rebuild drive with RSTe support
Red Blinking at 4 Hz Identify drive with RSTe support
Red Blinking with two blinks
and one stop at 1 Hz
Hot spare for drive with RSTe support
Red 
󰀨
Power on for drive with RSTe support
Figure 3-8. BPN-NVME5-LB16A-S10 Model
Backplane SGPIO Jumper Settings
Jumper Setting Denition
Pins 1-2 x4 + x4 SAS AOC
Pins 2-3 x8 Onboard SATA (default)
Backplane SGPIO Jumper Settings


JP1