EasyManua.ls Logo

Supermicro SuperServer SYS-111C-NR - Front Panel Controls and LEDs

Supermicro SuperServer SYS-111C-NR
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
55
Chapter 4: Motherboard Connections
Control Panel
JF1 contains header pins for various buttons and indicators that are normally located on a


buttons and LED indicators.
Front Control Panel LEDs
Reset Button
Pin Denitions (JF1)
Pin# Denition
3 Reset
4 Ground
Power Button
Pin Denitions (JF1)
Pin# Denition
1 Signal
2 Ground
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
󰀨
󰀨
is in suspend mode, press the button for 4 seconds or longer. Refer to the table below for

Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset

Power Fail
The Power Fail LED connection is located at pins 5 and 6. Refer to the table below for pin

Power Fail LED
Pin Denitions (JF1)
Pin# Denition
5 3.3V
6 Power Fail LED

Table of Contents

Related product manuals