Supermicro SuperServer SYS-121H-TNR - Page 106

106
Chapter 7: Troubleshooting and Support
1. Using a di󰀨erent machine, copy the “Super.ROM” binary image le into the disc Root “\”
directory of a USB ash or media drive.
Note 1: If you cannot locate the "Super.ROM" le in your drive disk, visit our website at
www.supermicro.com to download the BIOS package. Extract the BIOS binary image into
a USB ash device and rename it "Super.ROM" for the BIOS recovery use.
Note 2: Before recovering the main BIOS image, conrm that the "Super.ROM" binary
image le you download is the same version or a close version meant for your motherboard.
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
drive and reset the system when the following screen appears.
3. After locating the healthy BIOS binary image, the system will enter the BIOS Recovery
menu as shown below.