59
Chapter 3: Maintenance and Component Installation
Installing AIOM
1. Remove the blank cover plate(
A1
), unscrewing the thumbscrew.
2. Slide the AIOM card in the opening until it seats in the motherboard slot.
3. Secure with the thumbscrew.
A1
3.9 AIOM Cards
The system supports up to one AIOM/OCP NIC 3.0 network port card.
AIOM Conguration
Slot Mechanical Electrical Thermal
A1
Small Form Factor,
OCP 3.0
x16 (CPU1) Up to 15W
Figure 3-13. AIOM Chassis Slot
Figure 3-14. Installing AIOM
Note: AIOM cards exceeding the 15W slot power envelope may require restricted conditions to
meet thermal specications of the AIOM card. Contact your Supermicro account representative
for more information.
To Next Page
Loading...
