9
Chapter 1: Introduction
Chapter 1
Introduction
1.1 Overview
This chapter provides a brief outline of the functions and features of the SuperServer
SYS-121H-TNR. The CSE-HS119-R1K24P2 chassis provides up to twelve congurable SAS/
SATA/NVMe drive bays with an optional front bezel. The X13DEM motherboard provides a
exible number of NVMe port per CPU via the PCIe MCIO connectors. An overview of the
system is listed below.
System Overview
Motherboard
X13DEM
Chassis
CSE-HS119-R1K24P2
Processor
Support
Supports dual Intel Xeon Scalable Family 4th Gen Series Processors (Socket E E1A
LGA4677, Socket E E1B LGA4677, or Socket E E1C LGA4677) with a thermal design
power (TDP) of up to 350W and four UPIs (UltraPath Interconnect) of up to 16 GT/s
Memory
Supports up to 8TB of 3DS RDIMM/RDIMM DDR5 (288-pin) ECC memory with speeds
up to 4800MT/s (or up to 4400MT/s in 32-DIMM conguration) (*Memory speed/capacity
support depends on the processors used in the system.)
Chipset
Intel C741
Drive Support
Eight 2.5" SAS/SATA/NVMe drives
Optional additional four 2.5" SAS/SATA/NVMe drives (see section 6.3 for options)
Two M.2 NVMe PCIe 3.0 x2/SATA3 hybrid ports in the 2280 and 22110 form factors
One VROC key header
Expansion Slots
Two PCIe 5.0 x16 FH, 10.5"L
One PCIe 5.0 x16 FHHL
I/O Ports
One AIOM (Slim) slot for exible networking (OCP 3.0 compatible)
One RJ45 dedicated BMC LAN port
Two rear USB 2.0 and one front USB 3.1
One VGA port (1 rear)
System Cooling
Eight 4cm heavy duty fans with optimal fan speed control
Two Air Shrouds
Power
Two Redundant Power Supplies Default: 1200W (Titanium Level)
Form Factor
1U Rackmount 1.7 x 17.2 x 29.3in. / 43 x 437 x 746mm (HxWxD)
Notes: A Quick Reference Guide can be found on the product page of the Supermicro website.
The following safety models associated with the SYS-121H-TNR have been certied as
compliant with UL or CSA: HS119-R12X13, HS119-R16X13, HS119-R20X13, HS119-R26X13,
HS119-R13DX13, HS119-R16DX13, HS119-12, HS119-16, HS119-20, HS119-26, HS119-13D,
HS119-16D.
To Next Page
Loading...
