Supermicro SuperServer SYS-121H-TNR - Appendix B System Specifications; Processors; Memory; Storage Drives

134
Appendix B: System Specications
Appendix B
System Specications
Processors
Supports dual Intel Xeon Scalable Family 4th Gen Series Processors (Socket E E1A LGA4677, Socket E E1B LGA4677, or
Socket E E1C LGA4677) with a thermal design power (TDP) of up to 350W and four UPIs (UltraPath Interconnect) of up to 16
GT/s
Note: Refer to the motherboard specications pages on our website for updates to supported processors.
Chipset
Intel C741
BIOS
AMI SPI BIOS
EFI GUI, SPI dual/quad speed control, riser card auto detection support, RTC (Real Time Clock) wakeup, IPMIView,
SMCIPMITOOL, IPMI CFG, SuperDoctor5, SD3 (for Windows OS), Redundant power supply unit detection, SPM, SUM-OOB/
InBand
Memory
Supports up to 8TB of 3DS RDIMM/RDIMM DDR5 (288-pin) ECC memory with speeds up to 4800MT/s (or up to 4400 MT/s in
32-DIMM conguration) (*Memory speed/capacity support depends on the processors used in the system.)
Storage Drives
Eight 2.5" hot-swap NVMe/SATA/SAS hybrid drive bays
Four optional front 2.5” hot-swap NVMe/SATA/SAS hybrid drive bays (see section 6.3 for options)
Two M.2 NVMe or Two M.2 SATA3
PCI Expansion Slots
Two PCIe 5.0 x16 FH, 10.5"L
One PCIe 5.0 x16 FHHL
Input/Output
Network: One AIOM (Slim) slot for exible networking (OCP 3.0 compatible)
LAN: One RJ45 Dedicated BMC LAN port
USB: Two rear USB 2.0 and one front USB 3.1
Video : One rear VGA port
Motherboard
X13DEM; Length 17.0", Width 11.5" (431.8 mm x 292.1 mm)
Chassis
CSE-HS119-R1K24P2 1U Rackmount, 1.7 x 17.2 x 29.3in. / 43 x 437 x 746mm (HxWxD)
System Cooling
Eight 4cm heavy duty fans with optimal fan speed control
Two air shrouds