51
Chapter 3: Maintenance and Component Installation
Removing a Hot-Swap Drive Carrier from the Chassis
1. Press the release button on the drive carrier, which will extend the drive carrier handle.
2. Use the drive carrier handle to pull the drive out of the chassis.
Installing Drives
1
2
3.6 Storage Drives
The storage drives are mounted in tool-less drive carriers that simplify their removal from the
chassis. These carriers also help promote proper airow. For compatible storage drives, see
the SYS-121H-TNR product page.
1
7
6
5
42
3
0
Figure 3-4. Logical Drive Number
Figure 3-5. Removing a Drive Carrier
To Next Page
Loading...
